Therm-App MD Pro Mobile Thermal Imaging Device for Elevated Body Temperature Measurement

In 2003, OPGAL was first to market thermal imaging cameras to measure airline passengers’ skin temperature when passing through SARS-affected regions. People exhibiting elevated skin temperatures may have a fever and can be isolated for further evaluation to determine the cause. Similar quarantine procedures may help minimize the spread of the Corona Virus outbreak.

This product is not a diagnostic tool. It cannot detect if an individual is sick – only if they have elevated body temperature. You should check a suspected individual with a medically approved measurement method – such as a thermometer.

Download the Datasheet
Download the Brochure

Product Features

384*288 Pixels of Superb Image Quality

With its large thermal sensor and high 384*288 pixel resolution, Therm-App® MD Pro provides excellent performance.

  • Multiple Hotspot Detection & Tracking
  • Advanced Deep Learning Algorithm
  • Accuracy +/- 0.3°C
  • Quick Hotspot Detection > 0.5s
  • Remote Sensor
  • Plug & Play
  • Linux-Based Solution
  • Stand-Alone Solution (powered by JETSON Nvidia)

Technical Specifications

Camera Specifications
Resolution384 x 288 pixels
Accuracy+/-0.3°c @ target temperature ranges of 25-45°c
(* Measured in controlled conditions at 25°c)
SensitivityNETD <0.07°c
Measuring Temperature Range 25-45°c
NUC CalibrationShutterless (no On Site calibration is needed)
Measurement Tools Advanced Deep Learning Algorithm
Imager (Detector)384 x 288 microbolometer LWIR 7.5 -14μm
Color PalettesGREEN, INFERNO, RAINBOW,LAVA, IRON, VIRIDIS, PSI
ZoomDigital Zoom
Feature updatesVia the Website (simple periodic updates)
Power Supply & ConsumptionNo battery, 5V DC over USB cable, <0.5W
Optics6.8mm lens (55° x 41°)
FocusManual, 0.2m to infinity
Frame Rate8.7Hz
Weight123 grams / 4.33 ounces
Size55 x 65 x 40mm (2.16 x 2.55 x 1.57in)
Operating Temperature10°C to +45°C (14°F to +122°F)
Storage Temperature-20°C to +60°C (-4°F to +140°F)
Certifications & EncapsulationCE, FCC, IP54
Mount/Handle & Device AttachmentStandard tripod mount, using 1/4"-20
Clip-on for smartphones (5-10cm span)
Package includesUSB Cable, HDMI Cable, Ethernet Cable, Computer, 100-
240VAC Power Supply, Power Cable, and Mini Tripod
Mechanical Specifications
MountingWall Mount
Dimensions
(W x D x H)
88mm x 75mm x 39mm

3.46” x 2.95” x 1.53”
Net Weight0.3 kg
0.66 lbs
System Specifications
CPUSix Core ARM® Carmel® V8.2 Processor
System Memory8GB LPDDR4
AI SolutionNvidia Jetson Xavier NX
Display InterfaceHDMI 2.0
Storage Device16GB eMMC
Micro SD Slot x1
Ethernet10/100/1000 Base-TX x 1
USBUSB 3.2 Gen 1 x 4
I/OLAN x 1
RS-232 x 1
GPIO x2
HDMI x 1
MicroSD x 1
DC Power Input x 1
Recovery Button x 1
Micro-USB for Flash OS x 1
SoftwareSDK + ThermApp MD Pro Application
IndicatorPower LED x 1
OS SupportLinux (compliance with Ubuntu 18.04)
Power Supply12V DC w/ 2-pin terminal block
Power Consumption
& Operating Temp
15W @ 6 cores 1.4Ghz

* Based on 100% CPU load, 100% GPU load,
no throttling, and airflow of 0.5 m/sec.
Environmental Specifications
Operating Temperature-20°C ~ 40°C
-20°F ~ 104°F

* Based on 100% CPU load, 100% GPU load,
no throttling, and airflow of 0.5 m/sec.
Storage Temperature-40°c ~ 70°c
(-40°F ~158°F)
Storage Humidity95% @ 40°C, non-condensing
Anti-Vibration3 Grms/ 5 ~ 500Hz/ operation – MicroSD
or eMMC
CertificationCE/FCC class A